TopicLexmark Printer Technical Support Phone Number +1-888-597-3962
8 postsFri 30th Aug 2019 - 1:34pm
How to fix Lexmark Printer printing jam or paper jam?
Have you starting late gotten Lexmark Printer and endeavoring to print any record? In reality, even in the wake of presenting it fittingly with your structure on the off chance that you're going up against some essential glitches, for instance, printing jam or paper jam in your Lexmark Printer, by then you need to seek after some fundamental exploring steps like the ones given underneath. Regardless, you need to take out the adhered paper to know where it stalled out in the machine Lexmark Printer Tech Support Phone Number.
Note–On the off chance that you have any request or stresses over the Lexmark Printer printing jam or paper jam by then don't falter to call Lexmark Printer Care group to get help from the masters.
Take a gander at the methods as offered underneath to fix Lexmark Printer's printing jam or paper jam are-
You need to oust the machine plug from the power connection.
Check whether the paper reinforce pennant is open or close. Close in case it's open and even close the paper support.
Take out the plate absolutely from the Lexmark Printer.
You need to empty the two green switches inside the Lexmark Printer to release the stuck paper.
Take out the stuck paper, as it has been told.
You need to lift the 'Jam Clear Fold' and empty the stuck paper.
Open the 'Jam Clear Fold' from the back of the Printer.
Take out the stuck paper from the Printer.
Close the 'Jam Clear Fold' of the Lexmark Printer.
Using the plastic tabs from both the sides of the Printer to lift the scanner spread to open it.
Move the Lexmark Printer print head to take out the remainder of the paper inside the Printer.
Using the plastic tabs from both the sides of the Printer to lift the scanner spread to close it.
Fitting the two green switches back to the principal positions.
Drive the paper plate again into the machine Lexmark Printer Support Phone Number.
While holding the paper plate set up take out the paper support until it clicks and spreads out the paper reinforce overlay.
Reconnect the power string.
Select to print, to test whether the botch got disentangled or not.